Apart MA30 Half Rack 100V Mixer Amp 30W 1-Mic/2-Line 240VAC 2U

MA30 100V Mixer Amp 30W 1-Mic/2-Line 240VAC 2U

During the redefining process of the mixing amplifier one of the key-conclusions was to bring it back to basics and make it user-friendly. The cutting-edge Apart MA30 has an unseen intuitive user interface and ground breaking, logic and sheer rear panel. The volume control rotary on the front panel is prominent, illuminated, bigger and put in the forefront while the mic volume control is smaller and recessed. The MA30 comes in a compact 9.5” housing with 1 mic/line input and 2 stereo line, mono summed inputs. The smart left-to-right 4 level priority and rear panel design makes it intuitive for installers. On the rear panel you can find an emergency input, paging mic with chime and a 24VDC override output. Every end-user and installer will instantly see and understand how to operate or install this progressive MA30 mixing amplifier.

Product Features:

Intuitive user interface
Prominent, illuminated front volume control
Compact 9.5” housing
Smart left-to-right 4 level priority and rear panel design
1 mic/line input and 2 stereo line, mono summed inputs
Emergency input, paging mic with chime and a 24VDC override output on rear panel

Product Specifications
General

Power supply: 100 - 240 VAC
Power consumption (max): 60watts
Output power RMS 100 volts: 30watts
Output power RMS 4 ohms: 30watts
Dynamic output power 100 volts: 30watts
Minimum impedance load: 4 ohms
Output power tappings: 70 - 100 volts - 4 ohms
Zone outputs: 1
MIC inputs balanced: 2
Inputs with Phantom power: 1
Line input unbalanced: 2
Tone control: Yes
Priority switch: 2
VOX mute: Yes
Chime: Yes
Emergency input: 1
Priority output: 1
Priority levels: 4
Power amp topology: Class-D
Frequency response (in Hz): 60 - 20 k
Cooling system: Convection
Applicable in 100V: Yes
Applicable low impedance: Yes

Physical & Dimensions:

Height - rack units (1U=44 mm): 2 U
Depth (build in): 240mm
Depth (incl front): 250mm
Weight: 2.4kg