Apart Revamp 1680 16Ch Class D Amp 16 x 80W@4Ω 8 x 160W@8Ω 3U

Revamp 1680 16-Ch Class D Power Amp 16x80W @ 4ohm 3U

REVAMP1680 is a professional 16-channel digital power amplifier with 16 x 100 watts output power @ 4 ohms, but the unit is also bridgeable to 8 x 200 watts @ 8 ohms. This 3 rack units high amplifier with very high channel separation also has a dual analog power supply with toroidal power transformers. The standby power consumption is very low, less than 0.5 watts!

Another smart feature of the REVAMP1680 is the switching mode standby power supply with multiple auto power on/off options. You can power on or power off the unit via a trigger input, audio sense... The trigger input is ideal when you want to switch on the power amplifier automatically using an external AC or DC trigger signal coming from your audio system. The amplifier will be switched on as long as the trigger voltage is present. Alternatively, you can set the power on mode switch to the audio trig position: the amp will automatically switch on when a sufficiently strong audio signal is present at the input and automatically switch off after a few minutes of silence.

This amplifier is equipped with 2 stereo bus inputs with pass through. These bus inputs are ideal when you want to hear the same audio signal in different output zones with the advantages you need less audio cables and the installation can be done very fast.

With its very low standby consumption and the fact the amplifier can easily be integrated in any audio project, the REVAMP1680 will soon become your favourite multi channel power amplifier.

Product Features

Professional 16-channel digital power amplifier
16 x 80 watts output power @ 4 ohms
Very low standby consumption
Can easily be integrated in any audio project
Power on or power off the unit via a trigger input
Equipped with 2 stereo bus inputs with pass through

Product Specifications
General

Dynamic output power 4 ohms: 16 x 100 watts
RMS output power 4 ohms: 16 x 80 watts
Dynamic output power 8 ohms: 16 x 60 watts
RMS output power 8 ohms: 16 x 40 watts
Dynamic output power bridged 8 ohms: 8 x 200 watts
Output power RMS bridged 8 ohms: 8 x 160 watts
Minimum impedance load per channel: 4 ohms
Minimum impedance load bridged per channel: 8 ohms
Power consumption (max): 1350 watts
Power supply: 115 - 230 VAC
Power supply technology: toroidal transformers
Output channels: 16
Line input unbalanced: 20
Channel separation: > 68 dB @ 1 kHz
Power amp topology: class-D
Frequency response (in Hz): 20 - 30 k
Cooling system: convection
Applicable low impedance: yes

Physical & Dimensions

Height: 3U
Depth (build in): 405mm
Depth (incl front): 421mm
Weight: 21.7kg