Apart ZONE4 4-Zone Stereo Mixer 1-Mic/Line 4-Line i/p 1U

ZONE4 4-Zone Stereo Mixer 1-Mic/Line 4-Line i/p 1U

The sophisticated pre-amplifier ZONE4 allows you to control four stereo zones with just one affordable unit. In any of the 4 zones you can play music that comes from one of the 4 music sources you can connect. There is also the possibility to assign 3 microphones to each zone where MIC1 can be a dynamic priority mic (via contact closure) or a 4-zone selective paging microphone (MICPAT-4). Each signal is assignable to any of the four output zones through dipswitches on the front and the back of the unit. Phantom power supply on MIC 1 & 2 can be activated via a dip switch.

The ZONE4 can be controlled from the front panel (with digital display), via the RS232-connector or via the IR serial. On top of that you can control the unit via the ZONE4R remote control panels. Thes control panels have a clear LED status display and buttons for music level, MIC/MIX level, source select and mute controls. Because the remote is wired with a normal CAT5 cable, it is very easy to install.

On the output side, there is a line input selector and music level control per zone. A clear digital display makes it easier to monitor the functioning of the unit. Further, there are independent MIC-MIX level control and bass-treble control per zone.

The unit is 19” format and comes standard with removable brackets. The removable metal cover (included) protects your MIC-settings.

Product Features:

Pre-amplifier allows control of four stereo zones with one unit
Play any one of four sources in any of the four available zones
MIC-MIX level control and bass-treble control per zone
Assign up to 3 microphones to each zone via dipswitches
Phantom power supply on MIC 1 & 2
The remote is wired with a normal CAT5 cable

Product Specifications
General

19" (483 mm wide) rack mounting: yes
Power supply: 115 - 230 VAC
Power consumption (max): 25 watts
Zone outputs: 4 stereo
Output level balanced (dB): 0
Output level unbalanced (dB): 0
S/PDIF output: no
Signal to noise level SNR (dB): >90
Total harmonic distortion TBH (%): <0.02
Crosstalk (dB): >75
Music level control: yes
MIC level control: yes
VCA level control: no
Source selection per zone: yes
MIC inputs balanced: 3
MIC inputs unbalanced: 0
Inputs with Phantom power: 2
Phantom power voltage: 18 volts
Noise gate on MIC: no
Selectable input dynamics: no
Selectable output dynamics: no
Line input balanced: 0
Line input unbalanced: 4 stereo
S/PDIF input: no
Tone control: yes
RS232 (serial communication port): yes
Wall panel controls: yes
Priority input contact: yes
Maximum qty paging Mics: 4
Chime: no
Emergency input: yes
Priority output contact: no
Priority levels: 2
Frequency response (in Hz): 20 - 30 k
Applicable in 100V: yes
Applicable low impedance: yes

Physical & Dimensions:

Weight: 2.75kg
Height- rack units: 1U
Depth (build in): 196mm
Depth (incl front): 205mm