Cloud 24-120 2-Zone Mixer Amplifier 5-Input 2x120W 4/8Ω 100V RS232 1U

24-120 2-Zone Mixer Amplifier

The Cloud 24-120 is a brand-new approach to 2 Zone Mixer Amplification. Utilising the highest quality amplifier and power supply digital technology. It combines simple control of background music source, music level and microphone paging for up to two zones in a single unit. It has extensive remote control facilities and is ideal for installation in premises such as pubs, bars, hotels, leisure and fitness centres, retail and other small commercial premises.

The 24-120 in includes two transformer-less Class-D 120W amplifiers with limiters on each zone plus Thermal/Short Protection, as well as 4 Line inputs (2x unbalanced/ 2x balanced). High-Impedance Power sharing means the 24-120 automatically allocates unused channel power with no configuration required (240W available).

Product Features

Two zone mixer/amplifier
2 x transformer-less Class-D 120W amplifiers with limiters on each zone plus Thermal/Short Protection
4 Line inputs, 2x unbalanced/ 2x balanced
1 Mic input with analogue paging options
Integrated chime triggered by access control
100Hz dedicated high-pass filter on Microphone input
Phantom power selectable by internal jumper
Music level and source selection via RSL-4 & RSL-6
Facility input (Zone 1 or Both) for active modules LM-2/BT-1
RS232 control interface
Line 4 priority
Mic over Music input priority
Separate EQ for music and mic signals
2 x Auxiliary balanced line outputs
1 x Utility / Loop output with independent line & mic controls with music content selection
Remote Music Mute configurable for NO or NC operation
Selectable speaker output impedance (4Ω/8Ω/70v/100v)
High-Impedance Power sharing, 240W available
Efficient, Universal Power Supply
Variable Speed Fan Cooling

Product Specifcations

Line Inputs

Frequency Response: 20 Hz to 20 kHz, ±1 dB
Sensitivity: 195 mV (-12 dBu) to 2.0 V (+8 dBu)
Input impedance: >10 kohm (balanced/unbalanced)
Headroom: 12 dB
Noise: <-90 dB (22 kHz bandwidth)
Equalisation: HF: ±10 dB @ 10 kHz; LF: ±10 dB @ 50 Hz

Microphone Input

Frequency Response: -3 dB @100 Hz (fixed filter) to 20 kHz, ±1 dB
Sensitivity: 2.45 mV (-50 dBu) to 245 mV (-10 dBu)
Input Impedance: 3.3 kohms (balanced)
Phantom Power: 12 V, selectable by jumper
Headroom: 16 dB
Noise (EIN): <-126 dBu
Equalisation: HF: ±10 dB @ 5 kHz LF: ±10 dB @ 100 Hz

Facility Input

Frequency Response: 20 Hz to 20 kHz, ±1 dB
Sensitivity: 0.775 V (0 dBu)
Input impedance: 10 kohms (balanced)
Headroom: 18 dB
Noise Gate: -60 dB

Main Outputs

Output Power (1 kHz continuous sine wave)
24-120: 120 watts per zone nominal; 240 W total available in Power Sharing mode
24-240: 240 watts per zone maximum

Minimum load
Low-Z output: 4 or 8 ohms
High-Z output
70 V-line
24-120: 41 ohms
24-240: 20.5 ohms
100 V-line
24-120: 66 ohms
24-240: 33 ohms

Frequency response
Low-Z output: 20 Hz to 20 kHz, ±1 dB
High-Z output: 20 Hz to 20 kHz, ±1 dB (65 Hz filter off)
THD + N: < 0.05% @ 1 kHz
Protection: Fixed level signal limiter: DC, over-current and over-temperature protection

Utility and Auxiliary Outputs

Nominal output level: 0 dBu (0.775 Vrms), balanced
Noise: <-90 dB, 22 kHz bandwidth

General

Power Input: Universal type, 85 to 265 VAC, 45 to 65 Hz
Fuse details
24-120: 5 x 20 mm, time delay, T4A
24-240: 5 x 20 mm, time delay, T5A
Normal operating temperature: 0 °C to 35 °C (Note: performance and specifications cannot be guaranteed outside of this range)
Cooling: Forced air cooling (front to side)