Labgear 2 In 6 Out + Full DAB/UHF/VHF Freeview Distribution Television Amplifier

Labgear, LDA2061LR, 6 Out + Full UHF/VHF Distribution Amplifier

Ideal for distributing TV/FM/DAB signals for 6 TVs & high level output for further distribution

This fully screened distribution amplifier carries analogue/digital TV and radio, FM/DAB, Freeview, DVB-T and DVB-T2 HD TV signals and has:

Key Features:

Separate inputs for VHF (Band III TV, FM and DAB digital radio) and UHF (Freeview, DVB-T and DVB-T2 HD digital TV)
Automatic line powering on the UHF input to power a masthead pre-amplifier for fringe reception areas or if you have a long cable run from aerial to amplifier
FULL (17dB) output which can either be used for very long cable runs or via a signal splitter to feed up to 8 further points.

A built-in Class 3 4G filter providing 45dB interference protection, More efficient Switch-Mode Power Supply which runs cooler

Improved gain flatness delivering a better balance across the performance range. Lower noise figure for optimised signal quality

Greater signal handling capacity to cope with more channels

Better impedance matching and therefore improved signal transfer from amp to cable

Compliant with the Radio Equipment Directive 2014/53/EU* and meets harmonised standard EN 303 354 for product Type D, Class 3

Specifications:

No of Inputs/Outputs 2/6 + Full
Frequency Range VHF 87-230MHz, UHF 470-782MHz
Gain per port 10dB/17dB Full
Gain flatness +/-1dB
Noise Figure Typical <3.0dB
4G protection Class 3 Typical -45dB
Isolation between outlets 20dB
Max. output level (IMA3 -60dB) 85dBμV
Return loss Input/Output 12dB/9dB
Auto Line Power on UHF 12V?50mA
RED, EMC and LVD Compliant
Built-in Power Supply 220V~50hz <3W
Dimensions 265 x 95 x 35mm