Primesat PR-1200 V Box Positioner with Handset

PRIMESAT V-BOX PR1200: DISEQC TO 36V POSITIONER WITH REMOTE CONTROL

A direct replacement for Jaeger Superjack, Technomate V-Box and Moteck V-Box I/II/III models.

The Primesat V-Box PR1200 enables a DiSEqC 1.2-compatible satellite receiver to control a traditional 36V actuator motor. It converts DiSEqC 1.2 commands from your receiver into 36V pulse and sensor signals for precise position storage—supporting up to 60 stored positions. It can also function as a standalone positioner.

This 3-in-1 unit features 99 programmable memory slots and is compatible with both DiSEqC 1.0 and 1.2 receivers. It also includes a remote control for standalone operation.

Features:

Compatible with all DiSEqC 1.0 & 1.2 receivers
Works with any receiver via optional remote control
Auto Turn-off Function
99 Programmable Memories
Short circuit and overload protection
Anti-noise circuit to avoid miscounting
Fine-tune function for better reception
Software limits protection
Re-calculate (adjust shift) function
3 Digit LED display
Compatible with any actuator or H-H Mount
Infra-red remote control included
Drive dish size up to 3.6m
Full protective design

What is included:

1 x Primesat PR1200 V-Box Positioner Unit
IR Remote Control
User manual
2 x AA Battery
UK 3 PIN PLUG ( UK ONLY )

FURTHER DETAILS:

Simply select a channel on your DiSEqC receiver, and your 36V motor and dish will automatically move to the correct satellite and channel. There's no need to use the V-Box handset (which is for manual operation only)—instead, control everything using your receiver’s remote while the V-Box is in automatic mode.

The LNB and control cables connect directly to the V-Box. A short F-connector fly lead runs from the V-Box to the receiver, allowing seamless automatic control via the receiver’s remote.

If needed, the unit can also function as a standalone positioner, with a handset included (though it's not required in automatic mode).

To connect to the V-Box, simply attach the four motor wires—two for the motor and two for the sensor—to the back of the unit. The LNB also connects to the V-Box, with a short fly lead linking it to the receiver’s LNB input.

PLEASE ORDER THIS ITEM ONLY IF YOU ALREADY HAVE A 36 VOLTS MOTORISED DISH INSTALLED.