TOA Electronics P2240 240W 100V Professional Power Amplifier

The P-2240 offers a high performance-to-cost ratio, and can be used with TOA's A-2000 Series mixer power amplifiers. Because the P-2240 features a 100V line input, it can be connected to the speaker line from another amplifier. Also, the P-2240's power can be switched on and off by remote control, allowing it to be operated independently of the A-2000 Series.

Can be either as a 100V booster amplifier or a 100V slave amplifier
Line level input (balanced, screw terminals)
100V Line level input (40dB, 330kR, screw terminals)
Loop output (balanced, screw terminals)
Speaker outputs: 100V, 70V, 4R
Remote power switch terminals
Fan cooling

Rated Output 240W
Power Consumption 238W (EN60065), 520W(AC operation at rated output, 15A (DC operation at rated output)
Frequency Response 50 - 20,000Hz (+/- 3 dB)
Distortion Under 1% at 1kHz,1/3 rated power
Input Line in: )dB, 10KΩ, balanced, screw terminal. 100V line in: 40dB, 330kΩ, unbalanced, screw terminal
Output LOOP OUT: Odb, 10kΩ balanced, screw terminal
SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:42Ω (100V)
LOW IMPEDANCE: 4Ω (31V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack
Phnatom Powe DC + 21V (MIC 1)
S/N Ratio Over 60dB
Tone Control Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz
Muting MIC1: Mutes other signals by 0 - 30 dB attenuation
Indicator Power signal, peak
Finish Panel: ABS resin, black/Case: Steel plate, black
Dimensions 420 (W) x 100.9 (H) x 360.3 (D) mm
Weight 13kg