Ultra Close Only 25mm From Ceiling Projector Mount Made For JVC DLA Projectors

JVC Close Mount

Low Profile JVC Bracket

The new low profile ultra slim projector bracket is designed to sit 25mm from the ceiling.

Its designed to fit the new range of JVC projectors (DLA-N5 / N7 and NX9)

Once installed you can fine tune the horizontal and vertical using the thumb screws

Due to the excellent lens shift specifications of the JVC range, it is preferable to mount the projector as close to the ceiling as possible.

This very strong design allows the installer to mount the projector only 25mm from the ceiling quickly and easily.

The design features fine horizontal and vertical adjustments to allow the installer to perfectly align the projector with the screen. First the N Range of projectors

Easy Installation

1 - Remove the four feet from the base of the projector
2 - Screw in the mounting bolts all the way using the hex head. Make sure the washer is in place. DO NOT OVER TIGHTEN
3 - Leave thumb screw at the top of the mounting bolt
4 - Tighten nut against washer to secure mounting bolt
5 - Fix the bracket to the ceiling with the security latches at the front
6 - Slide the projector on to the ceiling bracket. Immediately close the security latches and check the projector is mounted correctly.
7 - Turn thumb screws to adjust horizontal and vertical tilt