Uniview IPC3615SS-ADF28K-I1 AI Turret Camera (5MP, LightHunter, Mic, WDR)

Part of the Uniview LightHunter series, this turret IP camera has an impressive 5 megapixel HD resolution with a 2.8mm fixed-focal lens. This camera has the LightHunter chipset, allowing for full colour at night. Supporting up to Ultra265 compression and 40m of IR range; this camera also features a built-in microphone and MicroSD card slot. Alongside this, it also uses deep-learning AI (Artificial Intelligence), allowing it to analyse the picture for movement and only alert/record when a human or vehicle is detected, ignoring animals and nature.

- Resolution 5MP (2880 x 1620), POE
- Fixed 2.8mm Lens, Viewing Angle 110.7° (H)
- Smart IR, Up To 40m IR Range
- Built-in Microphone
- Anti-Reflection Design To Improve IR Effectiveness
- Day/Night or Full Colour, IR Cut Filter, 3D DNR
- True WDR, OSD, Triple Streams
- Privacy Mask, Motion Mask, ROI, 9:16 Corridor Format Support
- MicroSD Card Slot (see Special Features)
- VCA - Line Crossing, Face Detection (see Features)
- Supports H.264, H.265 or Ultra265
- ONVIF Compliance (Profile G, S, T)
- Temperature Range -30°C to 60°C
- Wide voltage range of ±25%
- Built-in surge protection, up to 2kV
- Metal Housing, IP67 Rated

Specifications:

Camera
Image Sensor: LightHunter CMOS (1/2.7")
Resolution: 5MP
Effective Pixels (H x V): 2880 x 1620
TV System: PAL / NTSC
Shutter Speed: Auto/Manual, 1~1/100000s
Signal-to-noise Ratio: >56dB
Iris: Electronic
Back Light Compensation: Via OSD Menu
Wide Dynamic Range: 130dB
Digital Noise Reduction: 2D/3D
Gain Control: Auto
Sync Mode: Internal
White Balance: Auto/Manual
Lens: Fixed 2.8mm Lens
Field of View: 110.7°
Scanning: Progressive Scan
Onboard Recording: Yes, to MicroSD card up to 256GB

DORI
Detect: 63.0m
Observe: 25.2m
Recognise: 12.6m
Identify: 6.3m

Day/Night
Day & Night: IR Cut Filter (Smart IR)
Minimum Illumination: Colour 0.002Lux, 0Lux with IR on
IR Range: 35-40m
IR Control: CDS Auto

Network
Ethernet: RJ45 10/100
Supported Protocols: IPv4, IPv6, IGMP, ICMP, ARP, TCP, UDP, DHCP, PPPoE, RTP, RTSP, RTCP, DNS, DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP, 802.1x, SNMP, QoS, RTMP, SSL/TLS, SSH
ONVIF: Supports ONVIF (Profile G, Profile S, Profile T)
POE: Yes
Main Stream: 2880x1620@30fps
Sub Stream: 1280x720@30fps

General
Power: DC 12V±25% / PoE (IEEE 802.3af)
Housing: Metal
Power Consumption: Max 6.5W
Operating Temperature: -30°C ~ +60°C
Operating Humidity: 10% - 95% RH
Ingress Protection: IP67
Approvals: CE / FCC
Weight: 425g

Interface
Built-in Microphone: Yes

This camera has the following special features:

ANR (Automatic Network Replenishment)

ANR is a feature which allows a camera to record to an onboard MicroSD card, if it loses connection with the NVR. Once the connection has been re-established, the footage is transferred to the NVR. This feature requires ANR support from the camera and NVR.

ASM (Auto Scene Match)

ASM is a feature which allows a camera to analyse the scene it's looking at, and adjust its image settings according to give the best possible picture. This feature requires WDR to be enabled.

LightHunter

LightHunter is the technology which allows for outstanding image at super low illumination during the night for both static and moving scenes. UNV LightHunter IPCs enhances the brightness of the images in a low-illumination environment by increasing the sensor target surface, sensor photosensitivity, lens aperture and transmittance as well as optimizing the hardware structure. UNV new-generation algorithm (U-ISP) has many advantages, such as reducing blur and noise and increasing sharpness. All of these advantages improve the definition and brightness of images. This also means that the camera can display full colour at night.

VCA (Video Content Analysis)

VCA is the ability to automatically analyse video to detect temporal and spatial events. This camera has the capability to do the following:

Audio Detection - Detect a sudden increase or decrease in sound
Crowd Density Monitoring - Detect the number of people in a pre-defined virtual region
Enter Area - Entering into a pre-defined virtual region
Face Detection - Detect a human face
Intrusion Detection - Entering and loitering in a pre-defined virtual region
Leave Area - Leaving a pre-defined virtual region
Line Crossing - Detect when a pre-defined virtual line has been crossed
Motion Detection - Movement within a pre-defined virtual region
People Flow Counting - Count the number of people passing over a virtual line, in a specified direction
Tamper Identification - Detect when the camera has been physically tampered with