Uniview IPC3634SS-ADZK LightHunter Eyeball Camera (4MP, Auto-Focus, IK10, Mic)

Part of the Uniview LightHunter series, this eyeball dome IP camera has an impressive 4 megapixel HD resolution with a motorised 2.7-13.5mm lens. This camera has the LightHunter chipset, allowing for full colour at night. Supporting up to Ultra265 compression and 40m of IR range; this camera also features a built-in microphone and MicroSD card slot.

- Vandal Resistant (IK10 Rating)
- Resolution 4MP (2688 x 1520), POE
- Motorised 2.7-13.5mm Lens, Angles 100.1° ~ 28.6° (H)
- Smart IR, Up To 40m IR Range
- Built-in Microphone
- Anti-Reflection Design To Improve IR Effectiveness
- Day/Night, IR Cut Filter, 3D DNR
- True WDR, OSD, Triple Streams
- Privacy Mask, Motion Mask, ROI, 9:16 Corridor Format Support
- MicroSD Card Slot (see Special Features)
- VCA - Line Crossing, Face Detection (see Special Features)
- Supports H.264, H.265 or Ultra265
- ONVIF Compliance (Profile G, S, T)
- Temperature Range -35°C to 60°C
- Wide voltage range of ±25%
- Metal Housing, IP67 Rated
- 6kV Surge Protection

Specifications:

Camera
Image Sensor: LightHunter CMOS (1/3")
Resolution: 4MP
Effective Pixels (H x V): 2688 x 1520
TV System: PAL / NTSC
Shutter Speed: Auto/Manual, 1~1/100000s
Signal-to-noise Ratio: >56dB
Iris: Electronic
Back Light Compensation: Via OSD Menu
Wide Dynamic Range: 120dB
Digital Noise Reduction: 2D/3D
Gain Control: Auto
Sync Mode: Internal
White Balance: Auto/Manual
Lens: Motorised 2.7-13.5mm Lens
Field of View: 100.1°~ 28.6°
Scanning: Progressive Scan
Onboard Recording: Yes, to MicroSD card up to 256GB

DORI
Detect: 60.8-303.8m
Observe: 24.3-121.5m
Recognise: 12.2-60.8m
Identify: 6.1-30.4m

Day/Night
Day & Night: IR Cut Filter (Smart IR)
Minimum Illumination: Colour 0.002Lux, 0Lux with IR on
IR Range: 35-40m
IR Control: CDS Auto

Network
Ethernet: RJ45 10/100
Supported Protocols: IPv4,IGMP,ICMP,ARP,TCP,UDP,DHCP, RTP,RTSP,RTCP,DNS,DDNS,NTP,FTP,UPnP,HTTP,HTTPS,SMTP,SSL
ONVIF: Supports ONVIF (Profile G, Profile S, Profile T)
POE: Yes
Main Stream: 2688x1520@30fps
Sub Stream: 720x576@30fps

General
Power: DC 12V±25% / PoE (IEEE 802.3af)
Housing: Metal
Power Consumption: Max 7W
Operating Temperature: -35°C ~ +60°C
Operating Humidity: 10% - 95% RH
Ingress Protection: IP67
Approvals: CE / FCC
Weight: 690g

Interface
Built-in Microphone: Yes

This camera has the following special features:

ANR (Automatic Network Replenishment)
ANR is a feature which allows a camera to record to an onboard MicroSD card, if it loses connection with the NVR. Once the connection has been re-established, the footage is transferred to the NVR. This feature requires ANR support from the camera and NVR.

LightHunter
LightHunter is the technology which allows for outstanding image at super low illumination during the night for both static and moving scenes. UNV LightHunter IPCs enhances the brightness of the images in a low-illumination environment by increasing the sensor target surface, sensor photosensitivity, lens aperture and transmittance as well as optimizing the hardware structure. UNV new-generation algorithm (U-ISP) has many advantages, such as reducing blur and noise and increasing sharpness. All of these advantages improve the definition and brightness of images. This also means that the camera can display full colour at night.

VCA (Video Content Analysis)

VCA is the ability to automatically analyse video to detect temporal and spatial events. This camera has the capability to do the following:

Audio Detection - Detect a sudden increase or decrease in sound
Enter Area - Entering into a pre-defined virtual region
Intrusion Detection - Entering and loitering in a pre-defined virtual region
Leave Area - Leaving a pre-defined virtual region
Line Crossing - Detect when a pre-defined virtual line has been crossed
Motion Detection - Movement within a pre-defined virtual region
Object Left Behind - Detect when an object has been left inside a region, which wasn't there before
Object Removed - Detect when an object has been removed from a region, which was there before
Scene Change - Detect when the scene changed
Tamper Identification - Detect when the camera has been physically tampered with