Features:
- Adjustable SAT inputs - You have the possibility to adjust the input signal strength of the LNB's and to adjust them to each other
- QUATTRO- and QUAD-LNB (Quattro-Switch)
- Delivery with instructions - Extensive German manual with connection diagrams
- Automatic switch-off of the LNB voltage
- Short circuit protection - Power supply protected with extra fuse so that in the case of a short circuit the entire multicast does not break
- Electronic fuse protected by optical and acoustic signaling in the power supply unit
A light-emitting diode in the power supply signals the operational readiness. In the case of a short circuit at the output of the power supply unit, for example, in the case of a short circuit in the lines and F-connectors, the light-emitting diode goes out and an acoustic warning signal sounds. After elimination of the short-circuit, the multi-switch can be reconnected after a short time
Technical specifications:
Automatic switch-off of the LNB voltage
LNB inputs 950-2150 MHz
Terr. Input 5-862 MHz (passive), 40-862 MHz (active)
Outputs 5-2150 MHz (passive), 40-2150 MHz (active)
Control: DiSEqC 1.0 (2.0) commands
Number of inputs (including terrestrial)
Number of outputs 60
Frequency range SAT 950-2150 MHz
Frequency range 40 to 862 MHz TERR active
Frequency range TERR passive 5-862 MHz
Insertion loss SAT (avg) 950 MHz 12dB / 2150 MHz 0 dB
Insertion damping TERR active (avg) 3 dB
Insertion damping TERR passive (avg) 35dB
Separation between V / H & L / H bands (min) 20 dB
Maximum input level SAT (avg) 80 dBuV
Maximum input level TERR active (avg) 76 dBuV
Maximum input level TERR passive (avg) 1 100 dBuV
Maximum output level SAT (avg) 1 75 dBuV
Maximum output level TERR active (avg) 1 71 dBuV
Maximum output level TERR passive (avg) 1 65 dBuV
Power consumption of each receiver 100 mA (18 V)
Power consumption (including connected LNBs): 11 W (passive), 13 W (active) + LNB
LNB Power supply: 150 mA max (12 V DC)
Dimensions W x H x D 35.5 x 35.0 x 5.0 cm
Temperature range -25 ~ + 50 ° C