"EMP Centauri E.Lite Class Multiswitch MS 9/60 EEU-13"
EliteLine Multiswitch MS 9/60 EEU-14 with energy-saving power supply for 40 subscribers and 2 satellites, input for 8 satellite levels, 1 terrestrial input (active / passive), adjustable SAT inputs.
Features:
- Adjustable SAT inputs - You have the possibility to adjust the input signal strength of the LNB's and to adjust them to each other
- QUATTRO- and QUAD-LNB (Quattro-Switch)
- Delivery with instructions - Extensive German manual with connection diagrams
- Automatic switch-off of the LNB voltage
- Short circuit protection - Power supply protected with extra fuse so that in the case of a short circuit the entire multicast does not break
- Electronic fuse protected by optical and acoustic signaling in the power supply unit
A light-emitting diode in the power supply signals the operational readiness. In the case of a short circuit at the output of the power supply unit, for example, in the case of a short circuit in the lines and F-connectors, the light-emitting diode goes out and an acoustic warning signal sounds. After elimination of the short-circuit, the multi-switch can be reconnected after a short time
Technical specifications:
Automatic switch-off of the LNB voltage
LNB inputs 950-2150 MHz
Terr. Input 5-862 MHz (passive), 40-862 MHz (active)
Outputs 5-2150 MHz (passive), 40-2150 MHz (active)
Control: DiSEqC 1.0 (2.0) commands
Insertion loss Sat. 12-0 dB avg
Terr. Passive 30 dB avg
Terr. Active 5 dB avg
Sat. inputs isolation Between V / H polarization 20 dB min
Between low / high bands 20 dB min
Between sat. system 25 dB min
Maximum input level * Sat. 80 dBµV avg
Terr. 100 dBµV avg (passive)
76 dBµV avg (active)
Maximum output level * Sat. 75 dBµV avg
70 dBµV avg (passive)
71 dBµV avg (active)
Power consumption From each receiver 100 mA (18 V)
Power Consumption (including connected LNBs): 19 W (passive), 21 W (active) + LNB
LNB Power Supply: 150 mA max (12 V DC)
Dimensions W x H x D 35.5 x 44.0 x 5.0 cm
Temperature range -25 ~ + 50 ° C